 |
| Quantity: | |
|---|---|
Inner Tube: The adjustable part that extends or retracts within the outer tube.
Outer Tube: The stationary part that houses the inner tube.
Prop Nut: A threaded component used to adjust the height of the inner tube.
Jack Plate: A plate that may be used to distribute the load or provide a stable base for the prop.
Base Plate: A foundational component that offers stability and support at the bottom of the prop
 |
|
Adjustable steel prop is frequently used in formwork and construction to support the floors, ceilings, bridges and beams. With its high load-bearing capacity, it is popular on temporary supports during building repair or alteration work. The advantages are easy to use and time-effective to install, also lower cost. In construction, steel props is used as vertical support in scaffolding as below situation, such as: removing walls, making holes, temporary support for ceiling, beams and so on. All props are packed in bundles, some with wooden pallet. Or can packed with plastic wrap. Then how to test the quality of steel props when you purchase the products. Firstly, the raw material of the steel tubes. There are various steel coils for tubes such as Q195, Q235 and Q345 with different mechanical performance. Secondly, the welding parts is significant. The welding lines should be smooth and totally melt with the plate. It's important to check the welding lines in case of incomplete welding and air holes. Thirdly is the surface. Painted, galvanized, powder coated surface are available. Painting is easy to fall off after cracking while the galvanized ones are better on anti-rusting. Powder coated surface is much better than painted, but the cost is much higher.
| Name | Adjustable Length Range (mm) | Outer Tube Diameter (mm) | Inner Tube Diameter (mm) | Wall Thickness Range (mm) |
| Scaffolding Steel Prop-Mideast AsiaType | 1400-2700 | 60.3 | 48.3 | 1.6-3.0 |
| 1600-2700 | 60.3 | 48.3 | ||
| 1620-2640 | 60.3 | 48.3 | ||
| 2000-3500 | 60.3 | 48.3 | ||
| 3000-5500 | 60.3 | 48.3 |
Inner Tube: The adjustable part that extends or retracts within the outer tube.
Outer Tube: The stationary part that houses the inner tube.
Prop Nut: A threaded component used to adjust the height of the inner tube.
Jack Plate: A plate that may be used to distribute the load or provide a stable base for the prop.
Base Plate: A foundational component that offers stability and support at the bottom of the prop
|
|
Adjustable steel prop is frequently used in formwork and construction to support the floors, ceilings, bridges and beams. With its high load-bearing capacity, it is popular on temporary supports during building repair or alteration work. The advantages are easy to use and time-effective to install, also lower cost. In construction, steel props is used as vertical support in scaffolding as below situation, such as: removing walls, making holes, temporary support for ceiling, beams and so on. All props are packed in bundles, some with wooden pallet. Or can packed with plastic wrap. Then how to test the quality of steel props when you purchase the products. Firstly, the raw material of the steel tubes. There are various steel coils for tubes such as Q195, Q235 and Q345 with different mechanical performance. Secondly, the welding parts is significant. The welding lines should be smooth and totally melt with the plate. It's important to check the welding lines in case of incomplete welding and air holes. Thirdly is the surface. Painted, galvanized, powder coated surface are available. Painting is easy to fall off after cracking while the galvanized ones are better on anti-rusting. Powder coated surface is much better than painted, but the cost is much higher.
| Name | Adjustable Length Range (mm) | Outer Tube Diameter (mm) | Inner Tube Diameter (mm) | Wall Thickness Range (mm) |
| Scaffolding Steel Prop-Mideast AsiaType | 1400-2700 | 60.3 | 48.3 | 1.6-3.0 |
| 1600-2700 | 60.3 | 48.3 | ||
| 1620-2640 | 60.3 | 48.3 | ||
| 2000-3500 | 60.3 | 48.3 | ||
| 3000-5500 | 60.3 | 48.3 |
